298 found, showing page 2 of 20
Halex 26780 Conduit Hanger with Speed Thread, #0, Steel, 5/BAG
PRODUCT OVERVIEW
Halex Conduit Hanger, #0 Trade, Steel, Suitable for: 1/2 in EMT or RGD Conduits.
Product Details
Material:Steel
Suitable for:1/2 in EMT/Rigid Conduit
Trade Size:0
View Details
$4.79
Halex 26781 Conduit Hanger, #1, Steel, EMT and RGD: 3/4"
PRODUCT OVERVIEW
Halex Conduit Hanger, #1, Steel, Suitable for: 3/4 in EMT or RGD Conduits
Product Details
Material:Steel
Suitable for:3/4 in EMT or RGD Conduits
Trade Size:1 AWG
View Details
$4.99
Halex 97623 Liquidtight Quick-Set Connector, 1 in, 90 deg Angle, PVC/Zinc, Each
PRODUCT OVERVIEW
Halex Liquidtight Quick-Set Connector, Trade Size: 1 in, PVC/Zinc, Suitable for: 1/2 in Knockout
Product Details
Material:PVC/Zinc
Suitable for:1/2 in Knockout
Trade Size:1 in
Features
Fitting will not rust or corrode
No disassembly required, just hand-tighten nut
It is reusable
View Details
$6.49
Halex 26122 Conduit Strap, 3/4 in, Steel, Galvanized, 10/BAG
PRODUCT OVERVIEW
Indoor or outdoor use. Use to secure rigid or IMC conduit to wood, masonry or similar surfaces where greater load bearing is required. UL Listed, CSA Approved.
Product Details
Finish:Galvanized
Height:6.0 in
Material:Steel
Thickness:5/8 in
Trade Size:3/4 in
Width:2-1/4 in
View Details
$5.39
Carlon UA9ADB-CTN Elbow, 90 deg Angle, 1/2 in Bell End, PVC, Gray, 1/PK
PRODUCT OVERVIEW
For use with non-metallic solvent weld fittings. Non-conductive, impact, corrosion and sunlight-resistant. SCH 40. UL 651 Listed to the NEC by the ETL, UL listed.
Product Details
Angle:90 deg
Color:Gray
Connection Type:Bell End
Dimensions:0.844 in L
Material:PVC
Schedule Rating:SCH 40
Suitable for:Non-Metallic Solvent Weld Fitting
Trade Size:1/2 in
View Details
$1.19
Halex 26123 Conduit Strap, 1 in, Steel, Galvanized, 4/BAG
PRODUCT OVERVIEW
Indoor or outdoor use. Use to secure rigid or IMC conduit to wood, masonry or similar surfaces where greater load bearing is required. UL Listed, CSA Approved.
Product Details
Finish:Galvanized
Height:12.0 in
Material:Steel
Thickness:3/4 in
Trade Size:1 in
Width:2-5/8 in
View Details
$3.49
Halex 90661 Watertight Connector, Threaded, Zinc
PRODUCT OVERVIEW
Die-cast of high strength zinc alloy. Use to secure SE/SEU cable to a metal enclosure. Use to connect UF cable to a waterproof box with a threaded hub.
Product Details
Cable Size:14/2 to 12/2 AWG
Cable Type:SE SEU UF
Connection Type:Threaded
Material:Zinc
Type:Standard
View Details
$3.79
Halex 64005 Rigid Conduit Coupling, 1/2 in Threaded, 1.01 in OD, Steel, Galvanized, Each
PRODUCT OVERVIEW
Steel, indoor or out. Use to join threaded Rigid or IMC conduit together. UL listed.
Product Details
Connection Type:Threaded
Finish:Galvanized
Length:1-5/8 in
Material:Steel
Outside Diameter:1.01 in
Trade Size:1/2 in
Features
Use to join threaded rigid or IMC conduit together
View Details
$2.39
Halex 20581 AC Connector, For: 14 to 2 Steel Armored Cable, 3/8 in
PRODUCT OVERVIEW
In a dry location, use to connect AC (BX) cable to a steel outlet box or other metal enclosure. Suitable for #14-2 steel armored cable.
Product Details
Material:Zinc
Suitable for:14 to 2 Steel Armored Cable
Trade Size:3/8 in
View Details
$5.99
Halex 27511 Cable Connector, 3/8 in, 3-31/32 in L, Nylon, Gray, Push-In
PRODUCT OVERVIEW
Fits #14/2, #14/3, #12/2, #10/2, #10/3 NM cable. Snap-in, no screws or locknuts required. In a dry location, use to connect non-metallic sheathed cable to a steel outlet box or other metal enclosure. Design allows for two-step installation. Push into box and insert cable. UL listed, CSA certified.
Product Details
Color:Gray
Height:6.19 in
Length:3-31/32 in
Material:Nylon
Mounting Type:Push-In
Trade Size:3/8 in
Width:6-7/64 in
Features
Design allows for quick and easy two-step installation
Push into box and insert cable
No screws or locknuts required
View Details
$2.79
Halex 96194 Conduit Locknut, 1-1/4 in, Steel, Zinc
PRODUCT OVERVIEW
Steel with zinc plating. Indoor or outdoor applications. Use to secure Rigid or IMC conduit or various threaded fittings to a steel outlet box or other metal enclosure.
Product Details
Finish:Zinc
Material:Steel
Suitable for:IMC Conduit or Various Threaded Fittings Use with Rigid
Trade Size:1-1/4 in
View Details
$1.79
Gardner Bender GCC-510 Conduit Strap, 1-1/2 in, Polyethylene, Gray, 10/PK
PRODUCT OVERVIEW
Securely fasten schedule 40 PVC, copper tubing and other electrical and plumbing cables and pipes with these heavy-duty polyethylene straps. Unlike metal straps these plastic straps won't rust and they offer stability against UV rays and extreme cold while withstanding deterioration and breakage. Easily installed with a hammer or drill.
Product Details
Color:Gray
Height:7.5 in
Material:Polyethylene
Mounting Hole Diameter:1-1/2 in
Suitable for:1-1/2 in Conduits Copper and PVC Tubing
Trade Size:1-1/2 in
Features
Withstands extreme cold and UV rays
Will not corrode like metal straps
Easy to install
Secures up to 1 in and 1/2 in Dia conduit, pipe, tube or bundle
View Details
$4.99
Halex 61225 2-Hole Rigid Conduit Strap, 2-1/2 in, 1 in L, Steel, Galvanized, Each
PRODUCT OVERVIEW
To support EMT conduit where greater load bearing is required. Indoor or outdoor applications.
Product Details
Finish:Galvanized
Height:6.0 in
Length:1 in
Material:Steel
Trade Size:2-1/2 in
Width:4-7/8 in
View Details
$1.99
Halex 22212 EMT Connector, 3/4 in Compression, Zinc - 5/BAG
PRODUCT OVERVIEW
Indoors. Use to connect EMT conduit to steel outlet box, load center or other metal enclosure.
Product Details
Connection Type:Compression
Length:1.27
Material:Zinc
Trade Size:3/4 in
View Details
$5.69
Halex 90662 Watertight Connector, Zinc
PRODUCT OVERVIEW
Die-cast of high strength zinc alloy. Use to secure SE/SEU cable to a metal enclosure. Use to connect UF cable to a waterproof box with a threaded hub.
Product Details
Cable Size:12/2 to 12/3 AWG
Cable Type:NM SE SEU UF
Material:Zinc
Type:Standard
View Details
$3.99
